Panel Indicators; Grouping Dvr Sites Or Remote Cameras - Huper huberDVR 2400 User Manual

Opens the Scheduler where you can create schedules for recording surveillance
video. (See page 24 for details).
Click to add a new DVR site or group to the list.
Click to remove a DVR site or group.
Click to clear the entire Camera List Panel.

Panel Indicators

Description name of DVR site
Group
CCTV camera
PTZ camera
Indicates that the remote camera is selected.
A check mark that appears on a DVR site
name indicates that all cameras under it are
selected.
Indicates that only some cameras in a DVR
site are selected.

Grouping DVR Sites or Remote Cameras

You can create a group name to combine certain DVR sites into the same group.
If you only need to monitor certain cameras from each site, you can also create a group
name to combine these cameras under the same group. This allows huperRemote to
connect only to the required cameras instead of all the cameras on each site.
To create a group:
1. Click to open the Add Site/Group dialog
box.
2. Enter a group name in the Description text box,
then click OK.
The new group name will be added to the first
entry in the Camera List Panel.
13