Huper huberDVR 2400 User Manual page 55

1
2
Name
3
Type
4
Gain
5
Interval
6
7 From/To
Test
8
3 4 5 6
Specify the output device name (for instance, the location
where the output device is installed).
Select an output type: NC (Normal Close) or NO
(Normal Open).
Specify the output voltage.
Specify the interval for sending the specified output
voltage to the device.
Specify the valid time period for activating the output
device.
Click this button to output the specified voltage to NO-
type devices and output 0 voltage to NC-type devices
during the specified interval.
7
8
55