Removing Schedules - Huper huberDVR 2400 User Manual

4. The numbers that are lined up in columns represent the hours of a day. For each
selected camera, choose the desired hours when you want surveillance video to be
recorded by clicking the boxes underneath the hour columns.
Selected hours are indicated by color boxes. Non-selected (or deselected) hours are
indicated by gray boxes.
5. Next, choose the days of the week when you want surveillance video to be recorded by
clicking the buttons containing the names of the days of the week.
Selected days are indicated by colored buttons. Non-selected (or deselected) days are
indicated by gray boxes.
6. When you have finished setting up the cameras and the time and day of recording, click
OK.
7. Repeat steps 1 to 6 to set up the recording schedule for another DVR site.

Removing Schedules

There are three alternative ways you can do to remove some or all of the set recording
schedules.
To remove recording times or days in Scheduler:
Click to open the Scheduler. In the Scheduler dialog box, deselect the unwanted
hours or days of the week.
To remove recording times or days in Preferences:
Click to open the Preferences dialog box, then click Downloads & Schedules. (See
the image next page). This part of the Preferences dialog box lists the recording times per
scheduled day and the current recording status. (The entries in the list that show a clock
icon indicate that they are scheduled times of recording).
To remove a recording time, right-click the entry that shows the camera name and the
unwanted recording "Start" time. Then in the pop-up menu that appears, click DELETE
SELECTED.
To remove several entries from the list, press Ctrl and click each unwanted entry. Multiple-
selected entries will be highlighted in yellow. To remove them, right-click and then click
DELETE SELECTED.
25