Huper huberDVR 2400 User Manual page 141

NORESPONSETIME
BCSOFT
2. [DROP_FIELD] Section
Key Name
CHIP01 ~ CHIP16
3. [FRAME_RATE] Section
Key Name
CHIP01 ~ CHIP16
4. [COMPRESSOR_FAST] Section
Key Name Default
GOP 30
QP 7
Search_level 1
PS: Settings for HM Fast compression.
130 (Available since version 1.3)
Specify the delay time in seconds to restart the
computer when hardware watchdog has detected
a system halt.
1 (Available since version 1.4)
Enable/disable the software adjustmen of
brightness and contrast on camera video. 1 for
enable and 0 for disable.
Default Description
0 Specify the number of drop fields. Increase the
number will reduce the frame rate but keep better
video image quality. Disable by default.
Default Description
30 Specify the maximum capturing frame rate for each
Bt878 chip. 30 fps by default.
Description
Specify the frame rate of I-frame. Larger value gains smaller
data size but may reduce the image quality.
Specify the QP value. Smaller value gains better image quality
but has larger data size.
Specify the motion searching method. Value 1 has better
performance but has larger data size. Value 2 has smaller data
size but a bit slow.
141