Performing Manual Backups - Huper huberDVR 2400 User Manual

1 Backup list
View
2
3
Remove
4
Backup
5 Scheduled backup Enables the Backup Scheduler program to perform automatic

Performing manual backups

Manual backup allows you to selectively back up surveillance videos that were recorded by Site
Server within a date and time range. To perform a manual backup, click the Backup button to
open the following dialog box and configure backup settings:
1
Record database information
Backup range
2
Keeps a record of past backups. Each backup entry in the list
corresponds to an actual backup database file. Each backup
entry shows the date and time range of the surveillance videos
that were backed up, a textual description, and the folder
location where the backup database was saved.
Plays back the surveillance videos that are stored in a backup
database. To view the backed up surveillance videos, select the
appropriate entry from the Backup list and then click View to
play back the videos in the Record Viewer program.
Deletes one or more selected entries in the Backup list. Deleting
entries will also physically delete their corresponding backup
database files. To select multiple entries, hold down the Ctrl key
and click each entry you want to delete. Then, click Remove to
delete them.
Allows you to manually initiate a backup when there are
recorded surveillance videos in Site Server's Main database. (See
"Performing manual backups" below for more details.)
backups on a daily basis. (See "Setting up automatic backups"
on page 71 for more details.)
This displays information about the video recordings that
are currently stored in Site Server's Main database. The
information here shows the first surveillance video's date/
time of recording, the last video's date/time of recording,
the total file size of recordings, and the cameras from
which surveillance videos were recorded.
The options here determine which video recordings to
backup and whether to remove them from the Main
database after the backup process is complete.
75