Huper huberDVR 2400 User Manual page 46

Ch.2 Site Server
Flash message at local site
An "Event" indicator will be displayed if and only if the "Flash message at local site"
checkbox is selected in the Notification dialog box. A blinking "Event" indicator will
be displayed on the bottom left corner of a split screen on Site Server when an event is
detected.
Flash message at remote site
Displays an "Event" indicator on the Remote Viewer interface of users who are
remotely viewing your video cameras from a Web browser. A blinking "Event"
indicator will be displayed on the top, central portion of a split screen on the Remote
Viewer when an event is detected.
Change to single view and delay for __ seconds
Switches the Site Server screen to single view to display live the camera from which an
event has been detected. Specify the duration (in number of seconds) for retaining the
display in single view (after the event occurs) before changing Site Server back to split-
screen view.
Alarm
Plays an alarm sound. From the drop-down list, select from the available sounds, or
select "Custom" and then click Record to record your own alarm sound. To listen to a
preview of your recorded sound, click Play. You can also select the "Loop" option to
sound the alarm until the event terminates.
Note: Each camera can have its own customized alarm sound.
46