Using Remote Viewer through a direct
modem connection
Direct Modem Connection is a connection between two modem devices through the General
Telephone System that allows users to view remote cameras. Follow the steps on the next page to
set up the direct modem connection at the DVR Site Server machine and a remote client
machine."
Setting up the DVR Site Server machine
1. Install a modem device (card) to the DVR machine if the machine doesn't have a modem
installed.
2. Connect a valid telephone line to the "Line" port of modem device (card).
3. Set up an advanced connection in Windows for receiving incoming calls. Please refer to the
section "How to set up an Advanced Connection" for the details.
Make sure to assign a fixed IP address to your LAN card, whether it is a global IP address or a
local IP address. If you don't want to assign a fixed IP address to your LAN card, try to disable
the LAN card when enabling the direct modem connection.
Setting up a client machine for remote watch
1. Install a modem device (card) to the client machine if the machine doesn't have a modem
installed.
2. Connect a valid telephone line to the "Line" port of modem device (card).
3. Install the Remote Viewer program from the product CD.
Building a direct modem connection
Launch Remote Viewer by clicking Start - Programs - huperDVR 2400 Remote Viewer -
Remote Viewer. When the program opens, click the
108
button to open the "Log In" dialog box