Replacing The Casing Or Inner Tube Of Pneumatic Tyres; Replacing Defective Lamps - Otto Bock C2000 Instructions For Use Manual

9.3.3 Replacing the Casing or Inner Tube of Pneumatic
Tyres
The rims of the wheels are two-piece rims that can be sepa-
rated by removing the Allen head screws.
1. Disassemble the respective wheel.
2. Completely let the air out of the tyre.
3. Loosen all five screws that connect the two parts of the
rim.
4. Lever the casing off the rim.
5. Press the valve to the inside through the rim.
6. Pull out the defective inner tube.
7. Repair the inner tube with a standard tyre repair kit or
replace it with a new one.
Properly reassemble all components upon completion of the
work.
C2000
Fig. 40 Removing the casing
9.4 Replacing Defective Lamps
NOTICE
Risk of damage due to moisture. Do not expose the lamps
to moisture. When reinserting the pane, make sure it sits
correctly in the housing and that the screws are firmly tight-
ened.
01 / 2010
Malfunctions / Troubleshooting
Page 179