Stopping The Motorcycle And The Engine - Husqvarna TE 250 - 310 2011 I.E. Specifications - Operation - Maintenance

STOPPING THE MOTORCYCLE AND THE ENGINE

- Close the throttle (1) completely so that the engine will help
slow down the motorcycle.
- For normal braking, gradually apply both front and rear bra-
kes while down shifting (for maximum deceleration, apply the
front and rear brakes firmly).
- When stopped, pull the clutch lever and shift gear lever (2) in
neutral position.
EN - 22
- Press the engine stop RED button (3).
- TE: turn towards left the ignition key.
WARNING*: Independent use of the front or
rear brake may be advantageous under cer-
tain conditions. Use caution when using the
front brake, especially on slippery surfaces.
Improper use of the brakes can lead to a se-
rious crash.
2
3
TE - TXCi
WARNING*: In the event of stuck throttle or
other malfunction which causes the engine to
run uncontrollably, immediately depress the
engine stop button and hold it down. Control
the motorcycle by normal use of the brakes
and steering while holding the engine stop
button down.
TE
TC