Opening Screen; Main Menu (Top-Level Selection) - Comtech EF Data CDM-Qx Installation And Operation Manual

CDM-Qx Satellite Modem
Front Panel Operation
5.6

Opening Screen

Comtech EF Data CDM-Qx
Firmware Version:
This screen is displayed whenever power is first applied to the unit (70/140 MHz
version). For L-Band units, the word "
Pressing any key takes the user to the top-level selection screen:
5.7

MAIN MENU (TOP-LEVEL SELECTION)

MAIN MENU:
Test
The user is presented with the following choices:
Config
Monitor
Test
Info
Save/Load
Utility
1.1.1
Config
Info Save/Load Utility ODU
(Configuration) This menu branch permits the user to fully configure the unit.
This menu branch permits the user to monitor the alarm status of the unit, to
view the log of stored events, and to display the Receive Parameters screen.
This menu branch permits the user to invoke one of several test modes
(loopbacks, for example).
(Information) This menu branch permits the user to view information on the
unit, without having to go into configuration screens.
This menu branch permits the user to save and to retrieve up to 10 different
modem configurations.
(Utility) This menu branch permits the user to perform miscellaneous
functions, such as setting the Real-time clock, adjusting the display
brightness, etc.
CDM-Qx " is replaced with "
Monitor
5–7
Revision 6
MN/CDMQx.IOM
CDM-QxL ".