Table of Contents
Advertisement
CDM-Qx Satellite Modem
Remote Control
Command
Parameter
(Instruction
Type
Code and
qualifier)
Configuration
CST=
Save
Configuration
CLD=
Load
ReCenter Buffer
RCB=
RTC Date
DAY=
RTC Time
TIM=
Clear All Stored
CAE=
Events
Arguments
for Command
Description of arguments
or Response
to Query
1 byte
Command only
Causes the CDM-QX to store the current unit configuration
(common functions and all four slots) in Configuration Memory
location defined by the 1-byte argument (0 to 9)
Example: CST=4 (store the current configuration in location 4)
1 byte
Command only
Causes the CDM-QX to retrieve a previously stored unit
configuration (common functions and all four slots) in
Configuration Memory location defined by the
1-byte argument ( 0 to 9)
Example: CLD=4 (retrieve unit configuration from location 4)
None
Command only
Forces the software to recenter the receive
Plesiochronous/Doppler buffer.
Note: This command takes no argument.
Example: RCB=
6 bytes
Command or Query
A date in the form ddmmyy, where:
dd=day of the month (01 to 31)
mm=month (01 to 12)
yy=year (00 to 99)
Example: DAY=240457 (April 24, 2057)
6 bytes
Command or Query
A time in the form hhmmss, indicating the time from midnight,
where:
hh=hours (00 to 23)
mm=minutes (00 to 59
ss=seconds (00 to 59)
Example: TIM=231259 (23 hours, 12 minutes, 59 seconds)
None
Command only
Forces the software to clear the software events log.
Example: CAE=
Note: This command takes no arguments.
C-21
Response
Query
to
Response to query
(Instruction
Command
Code and
(Target to
Qualifier)
Controller)
CST=
N/A
N/A
CST?
CST*
CST#
CST^
CLD=
N/A
N/A
CLD?
CLD*
CLD#
CLD^
RCB=
N/A
N/A
RCB?
RCB*
RCB#
RCB$
RCB^
RCB@
DAY=
DAY?
DAY=ddmmyy (see
DAY?
description of arguments
DAY*
DAY#
DAY^
TIM=
TIM?
TIM= hhmmss (see
TIM?
description and
TIM*
arguments)
TIM#
TIM^
CAE=
N/A
N/A
CAE?
CAE*
CAE#
CAE^
Revision 6
MN/CDMQx.IOM
(Target to
Controller)
Advertisement
Table of Contents
