Comtech EF Data CDM-Qx Installation And Operation Manual page 188

Multi-channel satellite modem with doubletalk carrier-in-carrier
Hide thumbs Also See for CDM-Qx:
Table of Contents

Advertisement

CDM-Qx Satellite Modem
Remote Control
Command
Parameter
(Instruction
Type
Code and
qualifier)
Initialize Events
IEP=
Pointer
Statistics Sample
SSI=
Interval
Clear All Stored
CAS=
Statistics
Initialize Statistics
ISP=
Pointer
Internal
IRM=
Redundancy
Mode
Arguments
for Command
Description of arguments
or Response
to Query
None
Command only
Resets internal pointer to allow RNE? Queries to start at the
beginning of the stored events log.
1 byte,
Command or Query
numerical
Used to set the sample interval for the Statistics Logging Function
SSI=x, where x = 0 to 9 in 10-minute steps
Note: Setting this parameter to 0 disables the statistics logging
function.
Example: SSI=3 means 30 minutes
None
Command only
Forces the software to clear the software statistics log.
Example: CAS=
Note: This command takes no arguments.
None
Command only
Resets internal pointer to allow RNS? Queries to start at the
beginning of the statistics log.
5 bytes
Command or Query
Redundancy mode
Syntax: IRM=x,abc
Where x:
0=No Redundancy
1=1:1 modem (back-up cards at slot#3 and slot#4), or
1:1 Tx (back-up Tx on slot#4), or
1:1 Rx (back-up Rx on slot#4)
2=1:2 Tx, or 1:2 Rx (back-up card on slot#4)
3=1:3 Tx, or 1:3 Rx (back-up card on slot#4)
4=Reserved
where abc:
000=no redundancy or 1:1 modem or 1:3 Tx or 1:3 Rx.
If a=1, slot#1 is selected as primary, otherwise it's not.
If b=1, slot#2 is selected as primary, otherwise it's not.
If c=1, slot#3 is selected as primary, otherwise it's not.
Note: The settings on a,b, and c fields are only required if Qx is in
1:1 Tx or 1:1 Rx or 1:2 Tx or 1:2 Rx .
Example: IRM =1,000 (1:1 modem)
IRM =1,010 (1:1 Tx or 1:1 Rx with primary at
slot#2.
C-22
Response
Query
to
Response to query
(Instruction
Command
Code and
(Target to
Qualifier)
Controller)
IEP=
N/A
N/A
IEP#
IEP^
SSI=
SSI?
SSI?
SSI*
SSI#
SSI^
CAS=
N/A
N/A
CAS?
CAS*
CAS#
CAS^
ISP=
N/A
N/A
ISP#
ISP^
IRM =
IRM?
IRM = x,abc
IRM?
IRM*
(see description of
IRM#
arguments
IRM$
IRM^
Revision 6
MN/CDMQx.IOM
(Target to
Controller)

Advertisement

Table of Contents
loading

Table of Contents