Table of Contents
Advertisement
CDM-Qx Satellite Modem
Front Panel Operation
Selecting AUPC without 'Framed' mode selected results in the following display:
Warning! AUPC needs
Framed Mode (ENT or CLR)
Pressing either
selected.
Selecting AUPC with 'Framed' mode selected reults in display of the following menu:
(Config%Tx%Pwr%AUPC) – AUPC MODE
Target-Eb/No
DemodUnlock (◄ ►, ENT)
Select either Target EbNo, Max-Range, Alarm or Demod-Unlock using the ! "arrow
keys, then pressing
(Config%Tx%Pwr%AUPC) – TARGET Eb/No
Remote Demod - Target Eb/No
Min Eb/No:9.9dB (◄ ►, ▲ ▼, ENT)
Default value is 3.0 dB, and upper limit is 9.9 dB. Edit the target Eb/No of the remote
demod, using the ◄ ►
(Config%Tx%Pwr%AUPC) – MAX RANGE
Maximum-permitted Power
increase: 01dB (▲ ▼, ENT)
Default value is 1dB, and upper limit is 9 dB. Edit the maximum permitted increase in
power level (when in AUPC mode), using the #$ arrow keys, then pressing
(Config%Tx%Pwr%AUPC) – ALARM
Action when max Tx Power
reached: None TxAlarm (◄ ►, ENT)
Select the action that will occur if the AUPC causes the maximum output power level to
be reached – either None or TxAlarm – then press
or
returns the user to the previous menu with Manual
ENTER
CLEAR
Max-Range Alarm
.
ENTER
and
#$ arrow keys, then pressing
5–18
MN/CDMQx.IOM
.
ENTER
.
ENTER
Revision 6
.
ENTER
Advertisement
Table of Contents
