Table of Contents
Advertisement
11.1
Introduction
The base modem is equipped with an RJ-45, 10/100BaseT Ethernet management
interface used for monitor and control purposes. This chapter of the manual will provide
a high-level overview of the functionality provided by this interface.
11.2
Ethernet Management Interface Protocols
The modem 10/100BaseT Ethernet Management Interface supports three (3) different
management protocols:
•
•
•
IMPORTANT
Chapter 11. ETHERNET
Web Server interface for complete product management
SNMP with public and private MIB
Telnet interface for remote product M&C
Please make sure the unit is in Ethernet Remote Mode (Config!Remote!
Ethernet) in order to access the Web server, SNMP, or Telnet. It is not
recommended to do write access using Web, SNMP, and Telnet at the
same time.
MANAGEMENT
11–1
Advertisement
Table of Contents
