Relocating The Machine - Canon CP660 Service Manual

CHAPTER 8 INSTALLATION
III. RELOCATING THE MACHINE
If the machine must be moved by truck or any other means of transportation after
installation, perform the following steps.
The printer unit is designed to rotate its fans for 30 min after the power switch is
turned off to prevent overheating inside it. Be sure that the fans are not rotating before
starting the work.
No.
1
Take out the toner cartridges (Y, M, C, Bk).
Obtain the drum cartridge cover (MF4-0106)
2
taken out when installing the drum cartridge.
Set it as shown, and take out the drum car-
tridge while keeping it level.
3
Take out the orange fixing member used for
the secondary transfer belt.
8-16
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Work
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
1
2