Canon CP660 Service Manual page 232

CHAPTER 6 FIXING SYSTEM
11. Removing the Fixing Assembly
Lower Roller
1) Perform the steps on p. 6-17 to
remove the upper fixing roller.
2) Remove the C-shaped stop ring, and
remove the bushing and the bearing.
q
w
q C-shaped stop ring
w Bushing
e Bearing
Figure 6-337
3) Remove the grounding ring, and
remove the C-shaped stop ring.
q Grounding ring
w C-shaped stop ring
Figure 6-338
6-20
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
4) Remove the bushing and the bearing.
q Bushing
e
5) Remove the two screws, and detach
the two upper separation guides; then,
detach the lower fixing roller.
q Screws
w Upper separation guides
e Lower fixing roller
q
w
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
w Bearing
Figure 6-339
w e
q
Figure 6-340
w
q