Canon CP660 Service Manual page 150

CHAPTER 4 IMAGE FORMATION SYSTEM
Note:
Take care not to touch the surface of
the roller.
9. Removing the Separation Static
Eliminator
1) Open the front cover.
2) While pressing the releasing button,
shift the releasing lever 2 in the direc-
tion of the arrow.
q
q Releasing button
w Releasing lever 2
Figure 4-842
4-52
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
3) Holding the releasing lever, pull out
the separation static eliminator hori-
zontally.
w
q Releasing lever
w Separation static eliminator
Caution
When replacing the separation static
eliminator, take care not to touch the
charging wire.
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
q
w
Figure 4-843
: