Canon CP660 Service Manual page 138

CHAPTER 4 IMAGE FORMATION SYSTEM
2. Removing the Drum Motor
1) Remove the five screws, and detach
the drive case.
q
q Screws
Figure 4-802
2) Remove the drive gear shaft, and
remove the four screws; then, detach
the drum motor.
q Screw
Figure 4-803
4-40
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
w Drive case
q
w
q
w Drum motor
3. Removing the Developing Rotary
Position Sensor
1) Remove the screw, and detach the
developing rotary position sensor.
w
q
q Screw
w Developing rotary position sensor
Figure 4-804
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)