Canon CP660 Service Manual page 228

CHAPTER 6 FIXING SYSTEM
4) Remove the two screws, and pull out
the connector; then, pull out the lead
wire.
q
w
e
q Screws w Connector
e Lead wire
Figure 6-322
5) Remove the screw, and remove the
heater metal fixing; then, pull out the
upper heater slowly.
w q
e
q Screw w Heater metal fixing
e Upper heater
Figure 6-323
6-16
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
9. Removing the Lower Fixing Heater
1) Perform step 1 on p. 6-12 to remove
the fixing cover 1.
2) Remove the screw, and detach the
lead wire.
w
q Screw
Figure 6-324
3) Using the contact extracting tool
(RY9-0099), pull out the heater con-
tact from inside the connector.
w
q Connector
Figure 6-325
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
q
w Lead wire
q
w Heater contact