Canon CP660 Service Manual page 140

CHAPTER 4 IMAGE FORMATION SYSTEM
6) Remove the E-shaped stop ring and
the bushing.
q E-shaped stop ring w Bushing
Figure 4-809
7) Remove the E-shaped stop ring and
the bushing; then, detach the releas-
ing lever 2.
q
q E-shaped top ring
e Shaft of the releasing lever 2
Figure 4-810
4-42
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
q
w
e
w
w Bushing
8) Remove the screw, and disconnect
the connector; then, remove the metal
fixing and the secondary transfer belt
clutch.
q Screw
w Connector
e Metal fixing
r Secondary transfer belt clutch
Figure 4-811
9) Remove the two screws, and detach
the main drive assembly.
q
q Screw
w Main drive assembly
Figure 4-812
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
w
q
e
r
w