Canon CP660 Service Manual page 225

3) While pushing the claws with a high-
accuracy screwdriver, pull up the fix-
ing assembly inlet guide to the front to
detach.
q
q Claw
w Fixing assembly inlet guide
Figure 6-310
4) Disconnect the connector (white).
q Connector
Figure 6-311
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
q
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
5) Remove the screw, and detach the
upper thermistor.
w
q Screw
w Upper thermistor
Figure 6-312
6. Removing the
Switch
1) Shift down the jam removal lever, and
remove the E-shaped stop ring and
the spring; then, slide the lower sepa-
ration guide in the direction of the
arrow to detach it from the lower sep-
aration guide.
q w
q Jam removal lever
w E-shaped stop ring
e Spring
r Lower separation guide
Figure 6-313
q
Lower Thermal
r
e
6-13