Canon CP660 Service Manual page 91

12. Inside Cover 3
1) Open the right cover.
2) Remove the front right cover by fol-
lowing the steps on p. 3-14.
3) Push the releasing lever button; then,
remove the two screws, and detach
the releasing lever 2.
q Screws
w Releasing lever button
e Releasing lever 2
Figure 3-530
4) Remove the five screws, and detach
the inside cover 3.
q Screws
w Inside cover 3
Figure 3-531
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
e
q
w
q
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 LASER EXPOSURE SYSTEM
13. Inside Cover 4
1) Remove the inside cover by following
the steps on p. 3-20.
2) Remove the inside cover 3 by per-
forming steps 3) and 4) on p. 320.
3) Remove the screw, and detach the
jam removing knob.
q Screw
w Jam removing screw
Figure 3-532
4) Remove the four screws, and detach
the inside cover 4.
w
q Screws
Figure 3-533
q
w
q
w Inside cover 4
3-21