Canon CP660 Service Manual page 142

CHAPTER 4 IMAGE FORMATION SYSTEM
5) Remove the five screws, and detach
the shielding box.
w
q Screws
w Shielding box
Figure 4-817
Note:
Take care not to bend the grounding
spring found on both ends of the
shielding box.
6) Remove the four screws, and discon-
nect the connector; then, detach the
heat discharge fan 1 (FM1) together
with its holder.
q
q Screws
e Heat discharge fan 1
Figure 4-818
4-44
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
q
w
e
w Connector
7) Remove the five screws, and detach
the rear cover stay.
w
q Screws
w Rear cover stay
Figure 4-819
8) Remove the screw, and disconnect
the connector; then, remove the cable
clamp, and detach the heat discharge
fan 2 (FM2) together with its holder.
q
q Screw
w Connector
e Cable clamp
r Heat discharge fan 2
Figure 4-820
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
q
e
r
w