Canon CP660 Service Manual page 158

CHAPTER 4 IMAGE FORMATION SYSTEM
3) Remove the screw, and remove the
sub transformer 3.
q
q Screw w Sub transformer 3
Figure 4-859
13. Removing the
Cartridge Sensor
1) Perform the steps on p. 3-20 to
remove the inside cover 1.
2) Remove the screw, and disconnect
the connector; then, remove the color
toner cartridge sensor.
e
q Screw
e Color toner cartridge sensor
Figure 4-860
4-60
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
Color Toner
q
w
w Connector
14. Removing
Cartridge Level Sensor
1) Perform steps 2) through 6) on p. 4-43
to remove the rear cover, shielding
box, and heat discharge fan 1.
2) Remove the screw, and disconnect
the connector; then, detach the color
toner cartridge level sensor.
q
q Screw
e Color toner cartridge level sensor
Figure 4-861
Note:
When replacing the color toner car-
tridge level sensor, take care not to
touch the light-receiving/-emitting sec-
tion.
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
the Color Toner
w
e
w Connector