Canon CP660 Service Manual page 198

CHAPTER 5 PICK-UP/FEEDING SYSTEM
8) Remove the four screws, and detach
the pick-up assembly.
q
w
q Screws
w Pick-up assembly
Figure 5-604
Note:
1. If you are replacing any of the parts
of the pick-up assembly, be sure to
remove the pick-up roller, feeding
roller, and separation roller first to
avoid soiling them with grease.
Further, take care not to soil the
paper feeding guide with grease.
2. If you are replacing the gears shown
in Figure 5-605, be sure to apply
grease to prevent abnormal noise.
Use the appropriate grease (SHV-
2), and never use any that is not rec-
ommended.
To apply, put a small amount (size of
a small bean) over three or more
contiguous teeth.
5-36
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
q
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)