Canon CP660 Service Manual page 141

6. Removing the Main Motor
1) Perform the steps on p. 4-55 to
remove the DC controller PCB.
2) Remove the four screws, and discon-
nect the connector; then, detach the
main motor.
w
q Screws
e Main motor
Figure 4-813
7. Removing the Cartridge Motor
1) Perform the steps on p. 3-16 to
remove the rear cover assembly.
2) Remove the four screws, and discon-
nect the connector; then, detach the
cartridge motor.
q Screws
e Cartridge motor
Figure 4-814
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
q
e
q
w Connector
w
q
q
e
w Connector
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
8. Developing Rotary Motor
1) Perform the steps on p. 3-14 to
remove the upper cover.
2) Perform the steps on p. 3-16 to
remove the rear cover.
3) Remove the four screws, and discon-
nect the two connectors on the DC
controller PCB to detach; then, detach
the video interface PCB.
Connector
Screws
Video interface PCB
Figure 4-815
4) Remove the five screws.
q Screws
Figure 4-816
Connector
Screws
q
4-43