Download  Print this page

Advertisement

Table of Contents
CDI-E283-010 XXXXXXX © 2007 CANON INC.
DPUG14
PRINTED IN JAPAN
Direct Print User Guide
You don't even need a computer !
Just connect your camera to your printer and print

Advertisement

Table of Contents

   Related Manuals for Canon SELPHY CP400

   Summary of Contents for Canon SELPHY CP400

  • Page 1 CDI-E283-010 XXXXXXX © 2007 CANON INC. DPUG14 Direct Print User Guide You don’t even need a computer ! Just connect your camera to your printer and print PRINTED IN JAPAN...
  • Page 2 Introduction —Confirm Your Printer Model and the Section that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camera to the printer with an appropriate cable and confirm the icon displayed in the camera's LCD monitor.
  • Page 3 Printers (PIXMA Series/ SELPHY DS Series) using PictBridge" Page 52 " Printing with Non-Canon, PictBridge Compliant Printers" Page 53 " Printing with SELPHY CP Series Printers using Canon Direct Print" Page 71 " Printing with Bubble Jet Printers using Bubble Jet Direct"...
  • Page 4 Canon. • Canon reserves the right to change the specifications of the hardware described herein at any time without prior notice.
  • Page 5: Table Of Contents

    Table of Contents Direct Print ........6 Allows for Printing without the Use of a Computer .
  • Page 6 Printing with SELPHY CP Series Printers using Canon Direct Print....... . . 53 If you use Canon Compact Photo Printer SELPHY CP750/CP740/CP730/CP720/CP710/CP510 .
  • Page 7: Conventions Used In This Guide

    PictBridge....... 75 SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct .
  • Page 8: Direct Print

    Image selection and printing is operated from the camera. Various Printing Operations Can Be Performed* Multiple pictures can be printed at once. (DPOF print setting) * Some settings may not be selectable for Non-Canon printers. Prints to cover the entire surface of the paper.
  • Page 9: You Can Also Perform The Following Printing Operations

    • Capable printers: Printers using PictBridge (Including non-Canon printers) (This function is not available on some printers.) ID Photo Print Depending on the printer model, additional printing operations are available as follows: •...
  • Page 10: Connecting The Camera To The Printer

    Connecting the Camera to the Printer Connect the camera to the printer. For instructions on printer and camera operation methods, refer to their respective user guides. Set one of the following into the camera. • Compact power adapter (sold separately) •...
  • Page 11: Disconnecting The Camera And The Printer

    Disconnecting the Camera and the Printer Turn the power off. Detach the cable. Pull out the cable while holding the connector plug. Do not pull out by the cable.
  • Page 12: Using Pictbridge

    Printing with SELPHY ES Series/ SELPHY CP Series Printers using PictBridge Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Display the images you wish to print and press the button.
  • Page 13: Print After Changing The Print Settings

    LCD monitor. displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53). Display the images you wish to print and press the FUNC./ SET button. The print order screen appears.
  • Page 14: Cancel Printing

    • You cannot print incompatible RAW images. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing •...
  • Page 15: Selecting Print Settings

    Selecting Print Settings Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. Setting the Date and the File Number Printing Option If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [...
  • Page 16: Setting The Print Effect

    Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. Print effects will differ according to your printer’s settings. Refer Default to your printer’s user guide for details. Uses the camera’s shooting information to deliver optimum prints.
  • Page 17: Setting The Printing Area (trimming)

    Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. The trimming setting screen differs depending on the camera model.
  • Page 18 Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 19 Trim the image. Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 20 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 21: Selecting The Paper Settings

    Selecting the Paper Settings Select [Paper Settings] and press the FUNC./SET button. The paper size setting screen appears. Select a paper size* and press the FUNC./SET button. The default settings and specified paper cassette size are displayed. The paper type setting screen appears.
  • Page 22: Select A Layout

    Select a layout. The following layout can be selected. Default Print effects will differ according to your printer’s settings. Refer to your printer’s user guide for details. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4 or (8*) images on a single sheet of paper...
  • Page 23: Printing Multiple Images On A Sheet Of Paper

    Printing Multiple Images on a Sheet of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper.
  • Page 24: Id Photo Print

    Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) will allow you to specify the print size and print portion of an image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo.
  • Page 25: Print Area

    Selectable combination 20 mm 25 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.8 inch 2.0 inch Trimming Frame : Available print size Short Side 30 mm 35 mm 40 mm 45 mm...
  • Page 26 Printing Images in the Fixed Size Selecting [Fixed Size] in the layout setting (p. 20) will allow you to print by specifying the print size of the image on a sheet of paper. Select a layout and press the FUNC./SET button. This ends the paper settings operations.
  • Page 27: Single-frame

    Printing Movies (Movie Print) Single-frame You can choose a single frame from a movie and print it on a sheet of paper. Movie Control Panel Select the movie you want to print, then press the FUNC./ SET button. The movie control panel appears. If you press the instead of the FUNC./SET button, movie print begins.
  • Page 28: Sequence-frame

    Select [Print] and press the FUNC./SET button. Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Movie Control Panel Select [Print] and press the FUNC./SET button. It may not be possible to play back or print movies shot with a different camera.
  • Page 29 • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) •...
  • Page 30: Set Button

    Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide. In this section, we will explain how to print images after specifying them.
  • Page 31 • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print in Step 2. • When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time.
  • Page 32 Cancel Printing • To cancel printing between images printed, press the FUNC./ SET button. A confirmation dialog appears. Select [OK] and press the FUNC./SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the FUNC./SET button. The remaining images can be printed.
  • Page 33: List Of Messages

    List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. No Paper No Ink Paper and ink do not...
  • Page 34: Printing

    Printing with Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) PictBridge using Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Display the images you wish to print and press the button.
  • Page 35: Print After Changing The Print Settings

    Print after Changing the Print Settings You can change the print settings before printing. Sets the print effect (p. 36) Sets the date and the file number for printing (p. 35) Starts the printing process Print Order Screen Select print settings as needed. Select [Print] and press the FUNC./SET button.
  • Page 36 • You cannot print incompatible RAW images. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing •...
  • Page 37: Setting The Date And The File Number Printing Option

    Selecting Print Settings Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. • On printers equipped with an operation panel, you can change the settings for those items set to [Default] using the printer's operation panel.
  • Page 38: Setting The Print Effect

    If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [Date], [File No.] or [Both], the date/file number will be printed on the embedded information which is also printed.
  • Page 39: Setting The Number Of Copies

    Setting the Number of Copies Select [ ] and set the number of prints. 1 to 99 copies can be set.
  • Page 40: Setting The Printing Area (trimming)

    Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 42) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. The trimming setting screen differs depending on the camera model.
  • Page 41 Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 42 Trim the image. Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 43 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 44: Selecting The Paper Settings

    Selecting the Paper Settings Select [Paper Settings] and press the FUNC./SET button. The paper size setting screen appears. Select a paper size and press the FUNC./SET button. The following paper sizes* are available: 4" × 6", 5" × 7", 13 × 18 cm, 8.5" × 11", A4, CreditCard, 8"...
  • Page 45 Select a layout. The following layout can be selected. Default Print effects will differ according to your printer’s settings. Refer to your printer’s user guide for details. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4, 9 or 16 images on a single sheet...
  • Page 46: Printing Multiple Images On A Sheet Of Paper

    Printing Multiple Images on a Sheet of Paper • Selecting [4" x 6"] in the paper size setting (p. 42) will allow you to specify the following layout settings. 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper.
  • Page 47 Select a layout and press the FUNC./SET button. This ends the paper settings operations. The display returns to the print order screen. • Images will print with borders, even if [Borderless] was selected with the camera in the following cases: •When [Plain] is selected in the camera's [Paper Type] (cannot be selected depending on the connected printer model) •With printers equipped with an operation panel, when [Plain] is selected...
  • Page 48: Printing Movies (movie Print)

    Printing Movies (Movie Print) You can choose a single frame from a movie and print it on a sheet of paper. Movie Control Panel Select [Print] and press the FUNC./SET button. It may not be possible to play back or print movies shot with a different camera.
  • Page 49: Specifying And Printing Multiple Images (setting The Dpof Print Settings)

    Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide. In this section, we will explain how to print images after specifying them.
  • Page 50 • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date in Step 2. • When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer.
  • Page 51 Cancel Printing • Press the FUNC./SET button to cancel while printing. A confirmation dialog appears. Select [OK] and press the FUNC./ SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the FUNC./SET button. The remaining images can be printed.
  • Page 52: List Of Messages

    You can restart printing if you select [Continue] in the error screen. Please request replacement of the ink absorber from your nearest Canon Customer Support center listed in the contact list provided with the printer or in the user guide. The ink absorber cannot be replaced by the user.
  • Page 53 If Print error the error persists, please request a repair from your nearest Canon Customer Support Center (listed in the contact list provided with the printer). Unprintable settings are included. Select [Continue] on the error screen to display the print order screen.
  • Page 54: Selphy Ds Series) Using Pictbridge

    Printing with Non-Canon, PictBridge Compliant Printers Printing After this step, follow the procedures in the section Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge (p. 32) to print your images. However, the following menu options cannot be set.
  • Page 55: Canon Direct Print

    SELPHY CP750/CP740/CP730/CP720/CP710/ CP510 In the following cases, select camera’s [Set up] menu: • When printing (wide) size images shot using a Canon digital camera onto wide-size paper. • When printing images of human subjects after red-eye correction. After this, see Printing with SELPHY ES Series/SELPHY CP Series Printers using PictBridge (p.
  • Page 56: Print After Changing The Print Settings

    Print after Changing the Print Settings You can change the print settings before printing. Selects the Number of Copies (p. 55) Print Order Screen Select print settings as required. Select [Print] and press the FUNC./SET button. If you press the MENU button, the display will revert to the standard playback mode and printing will not take place.
  • Page 57: Setting The Print Style (image, Borders And Date)

    Cancel Printing • You cannot stop printing when printing only one copy of an image. If you are printing more than one copy or more than one image, you can cancel the rest of the printing by pressing the FUNC./SET button. Once the current print is finished, a confirmation dialog appears.
  • Page 58 In the print order screen, select [Style] and press the FUNC./SET button. Print Area Frame If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image.
  • Page 59: Setting The Printing Area (trimming)

    • When printing multiple prints, the [Borders] and the [Date] cannot be set. (Images are printed without any date or borders.) • Practically all of the image area displayed on the LCD monitor is printed on bordered prints. Setting the Printing Area (Trimming) You can specify which portion of an image gets printed.
  • Page 60 Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 61 Trim the image. Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 62 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 63: Printing By Specifying The Print Size (id Photo Print)

    Printing by Specifying the Print Size (ID Photo Print) You can specify the print size and print a portion of an image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo.
  • Page 64: Selectable Combination

    25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.8 inch 2.0 inch Trimming Frame Press the FUNC./SET button to close the setting menu. Selectable combination : Available print size Short Side 20 mm 25 mm 30 mm...
  • Page 65 • The print size setting only applies to one image. • The print size setting is canceled with the following operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 66: Printing Movies (movie Print)

    Printing Movies (Movie Print) Single-frame You can choose a single frame from a movie and print it on a sheet of paper. Movie Control Panel Select the movie you want to print, then press the FUNC./ SET button. The movie control panel appears. If you press the instead of the FUNC./SET button, movie print begins.
  • Page 67: Sequence-frame

    Select [Print] and press the FUNC./SET button. Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Movie Control Panel Select [Print] and press the FUNC./SET button. It may not be possible to play back or print movies shot with a different camera.
  • Page 68 • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) •...
  • Page 69: Specifying And Printing Multiple Images (setting The Dpof Print Settings)

    Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide. In this section, we will explain how to print images after specifying them.
  • Page 70 • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print with the [Style] menu in Step 2. • When the print type is set to [Index], the [Date] cannot be printed.
  • Page 71 Printing Errors • An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the FUNC./SET button. * The [Resume] option may not appear with some types of errors. In that case, select [Stop].
  • Page 72: List Of Messages

    List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) • Please refer to the printer’s user guide for solutions. No Paper No Ink Incompatible paper...
  • Page 73: Printing

    Bubble Jet Direct using Printing After this step, follow the procedures in the section SELPHY CP Series Printers using Canon Direct Print (p. 53) to print your images. However, please note that some menus and precautions differ, as listed below.
  • Page 74: See Page

    Cancel Printing • To cancel printing between images printed, press the FUNC./ SET button. A confirmation dialog appears. Select [OK] and press the FUNC./SET button. The printer will stop printing the current image and eject the paper. Printing Errors • An error message appears if an error occurs for some reason during the printing process.
  • Page 75 • The ID photo print function cannot be used. • If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image.
  • Page 76: Settings That Can Be Set With The Camera

    Settings that Can Be Set with the Camera SELPHY ES Series/SELPHY CP Series Printers using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Date/File No. Print Effect Number of Prints Trimming Paper Settings Movies (Movie Print)
  • Page 77: Bubble Jet Printers (pixma Series/selphy Ds Series) Using Pictbridge

    Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Date File No. Date/File No. Both Default Default Vivid Print Effect Vivid+NR Face Red-Eye1 Red-Eye2 Number of Prints 1 to 99...
  • Page 78 Paper Settings * Paper sizes vary according to region. 4" × 6" 13 × 18 cm 5" × 7" 8.5" × 11" CreditCard 8" × 10" Paper Size* 10" × 12" A3+/13" × 19" 14" × 17" 4" × 7.1" 12 cm DVD/CD Default Photo...
  • Page 79: Selphy Cp Series Printers Using Canon Direct Print Bubble Jet Printers Using Bubble Jet Direct

    SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Number of Prints 1 to 99 Image Style Paper...
  • Page 80 MEMO...
  • Page 81 MEMO...
  • Page 82 MEMO...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Janice Apr 08, 2017 01:51:
    Can you use a USB from a phone to the selphy 760 to print pictures