Canon CP660 Service Manual page 149

• Enlarged View of the Right End
q
w
q Sprint
Figure 4-838
5) Free the claw of the releasing knob
found on the left end of the ITD clean-
ing holder assembly, turn the releas-
ing knob in the direction of the arrow;
then, match the boss of the releasing
knob as shown.
Claw
Point of Removal
Releasing knob
Figure 4-839
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w Stay
Releasing knob
Claw
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
6) As in step 5), match the releasing
knob found on the right end of the ITD
cleaning holder assembly.
7) Pull out both ends of the ITD cleaning
holder assembly to take out the ITD
cleaning holder assembly horizontally.
q ITD cleaning holder assembly
Figure 4-840
8. Removing the ITD Cleaning Roller
1) Take out the ITD cleaning roller.
2) Pull out the roller roll to the front, and
slide it to the right; then, detach the
ITD cleaning roller.
q Roller roll
w ITD cleaning roller solenoid
Figure 4-841
q
w
q
4-51