Canon CP660 Service Manual page 88

CHAPTER 3 LASER EXPOSURE SYSTEM
7. Delivery Cover
1) Open the delivery cover.
2) Extend the two rods attached to the
printer, and detach the delivery cover
from the rod plates.
q Rods
e Delivery cover
Figure 3-518
3) Lift the delivery cover slightly to
detach its right; then, detach its left.
q Delivery cover
Figure 3-519
3-18
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
e
q
w Rod plates
q
8. Right Cover
1) Open the multifeeder tray.
2) Open the right cover.
3) Remove the screw, and turn over the
pre-exposure LED assembly.
w
q
q Screw
w Pre-exposure LED assembly
Figure 3-520
4) Disconnect the two connectors, and
detach the pre-exposure LED assem-
bly.
q Connector
w Pre-exposure LED assembly
Figure 3-521
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
w
q