Canon CP660 Service Manual page 152

CHAPTER 4 IMAGE FORMATION SYSTEM
3. Removing the Video Interface PCB
1) Perform the steps on p. 3-16 to
remove the rear cover.
2) Remove the four screws, and discon-
nect the two connectors on the DC
controller PCB; then, detach the video
interface PCB.
Connector
Screws
Video Interface PCB
Figure 4-846
4-54
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Connector
Screws
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3) Remove the two screws and the two
hex nuts; then, detach the video inter-
face PCB from the metal plate.
Hex nuts
Screw
Video Interface PCB
Figure 4-847
Screw