Canon CP660 Service Manual page 370

CHAPTER 10 TROUBLESHOOTING
4. PAPER FEED
Use it to pick up one sheet of paper from the selected pick-up slot and deliver to the
selected delivery slot.
Sub Menu
PAPER FEED Before executing PAPER FEED mode, selectthe
source of paper (cassette 1, cassette 2, multi-
feeder).
OUTPUT FACE Before executing PAPER FEED mode, select
the destination (face-down delivery, face-up
delivery).
:
Caution
1. If you want to execute test mode while keeping the door covers open, use the door
switch actuators to keep the door switches on.
2. Do not put your hand or face inside when checking the operation of the engine
while the door cover is open.
3. Do not execute operation/inspection mode until the engine stops operation.
5. READ MEMORY
This mode is stored in the EEPROM on the printer board, and is used to read various
backup data items (e.g., PARAMETER, BIAS) to the work area.
• Using READ MEMORY
1) Select <READ MEMORY>.
2) Press the ENTER key to select <READ FROM DCON>.
3) Using the
4) Press the ENTER key to execute.
5) See that 'READ FROM DCON EXECUTING>' is indicated.
6) Turn off and then on the power to end.
10-88
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Description
Printer board
Figure 10-603
key, select 'YES'.
or
RAM
Reading
EEPROM
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
1. Select 'PAPER FEED'.
2. Using the or
key, select the source
of paper.
3. Press the ENTER
key to execute.
4. Using the or
key, select the
destination.
5. Press the ENTER
key to execute.