Canon CP660 Service Manual page 146

CHAPTER 4 IMAGE FORMATION SYSTEM
4) Check to make sure that the develop-
ing rotary stopper arm is released;
otherwise, pull the stopper to the front.
q
q Developing rotary stopper arm
Figure 4-829
5) Open the toner cartridge cover; then,
put your hand through the slot of the
color toner cartridge, and rotate the
developing rotary assembly clockwise
slowly.
w
q
e
q Toner cartridge cover
w Color toner cartridge slot
e Developing rotary assembly
Figure 4-830
4-48
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Note:
When rotating the developing rotary
assembly, do not hold the releasing
lever. Be sure to hold the metal area of
the developing rotary assembly.
6) When the slot of the color toner car-
tridge and the position of the color
toner cartridge match, shift the releas-
ing lever in the direction of the arrow.
q
Figure 4-831
7) Take out the color toner cartridge.
Then, perform the foregoing steps 4)
through 5) twice to take out the three
color toner cartridges.
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
e
w