Canon CP660 Service Manual page 84

CHAPTER 3 LASER EXPOSURE SYSTEM
1. Front Cover
1) Open the front cover.
2) Remove the two screws, and remove
the metal fixing and the strap; then, lift
the front cover to detach.
r q
q Screws
e Metal fixing
Figure 3-503
2. Front Right Cover
1) Open the front cover.
2) Remove the screw, and detach the
front right cover.
q Screw
Figure 3-504
3-14
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
e
w Strap
r Front cover
q
w
w Font right cover
:
Caution
When mounting the front right cover to
the printer unit, be sure to check to
make sure that the two claws under
the front right cover and the hook on
the right of the front right cover are fit-
ted in the printer unit. Otherwise, the
front cover will not close.
3. Upper Cover
1) Remove the front right cover by fol-
lowing the steps on p. 3-14.
2) Open the left cover, and loosen the
two screws.
q Screws
Figure 3-505
3) Open the right cover, and loosen the
two screws.
q Screws
Figure 3-506
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
q
w Upper cover
q