Canon CP660 Service Manual page 223

2. Removing the Fixing Assembly
:
Caution
If the duplexing unit is mounted, be
sure to remove it before removing the
fixing assembly.
1) Open the delivery cover.
2) Shift the two fixing assembly locking
levers and the releasing lever in the
direction of the arrows; then, lift the
fixing assembly slightly, and detach it
to the front.
e
q Fixing assembly locking lever
w Releasing lever
e Fixing assembly
Figure 6-302
3. Mounting a New Fixing Assembly
1) Prepare a new fixing assembly, and
detach the two spacers (orange).
Figure 6-303
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
q
w
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
2) Place the fixing assembly on the
guide as shown.
Figure 6-304
3) Push the fixing assembly until it butts
against the rear end of the printer unit.
Figure 6-305
6-11