Canon CP660 Service Manual page 224

CHAPTER 6 FIXING SYSTEM
4) Push down the fixing assembly 1 to
place it correctly. Then, shift up the
levers 2 to secure it in place.
q
w
Figure 6-306
5) If you removed the duplexing unit,
mount it.
6) Close the lower left cover.
4. Removing the
Switch
1) Disengage the two claws, and remove
the fixing cover 1.
q
q Claws w Fixing cover 1
Figure 6-307
6-12
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
Upper Thermal
w
2) Remove the three screws, and detach
the upper thermal switch.
q Screws
Figure 6-308
5. Removing the Upper Thermistor
1) Perform step 1) on p. 6-12 to remove
the fixing cover 1.
2) Remove the two screws, and detach
the fixing cover 2.
q
q Screws
Figure 6-309
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
q
w
w Thermal switch
w
w Fixing cover 2