Feeding Assembly; Registration Roller Assembly - Canon CP660 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
C.

Feeding Assembly

1. Removing the Feeding Assembly
1) Perform the steps on p. 5-39 to
remove the delivery assembly.
2) Remove the two screws, and remove
the lower stay.
q
q Screw w Lower stay
Figure 5-612
3) Remove the six screws, and detach
the feeding assembly.
w
q
q Screws w Feeding assembly
Figure 5-613
5-40
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
w
q
D. Registration Roller
Assembly
1. Removing the Registration Roller
Assembly
1) Perform the steps on p. 4-50 to
remove the secondary transfer belt
assembly.
2) Perform step 3) on p. 3-21 for the
inside cover 4 to remove the jam
removal knob.
3) Disengage the two claws, and detach
the gear cover.
q Claws
Figure 5-614
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
q
w
w Gear cover