Table of Contents
Advertisement
Button Commands (Cont.)
^BIM
Set the input mask for the specified address.
Syntax:
Variable:
Example:
^BLN
Set the number of lines removed equally from the top and bottom of a composite video signal. The maximum number of lines to
remove is 240. A value of 0 will display the incoming video signal unaffected. This command is used to scale non 4x3 video
images into non 4x3 video buttons.
Syntax:
Variable:
Example:
^BMC
Button copy command. Copy attributes of the source button to all the destination buttons. Note that the source is a single
button state. Each state must be copied as a separate command. The <codes> section represents what attributes will be
copied. All codes are 2 char pairs that can be separated by comma, space, percent or just ran together.
Syntax:
Variable:
• source port = 1 - 100.
• source address = 1 - 4000.
• source state = 1 - 256.
Example:
Example 2:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
"'^BIM-<vt addr range>,<input mask>'"
variable text address range = 1 - 4000.
input mask = Refer to the Text Area Input Masking table on page 129 for character types.
SEND_COMMAND Panel,"'^BIM-500,AAAAAAAAAA'"
Sets the input mask to ten 'A' characters, that are required, to either a letter or digit (entry is required).
"'^BLN-<vt addr range>,<button states range>,<number of lines>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
number of lines = 0 - 240.
SEND_COMMAND Panel,"'^BLN-500,55'"
Equally removes 55 lines from the top and 55 lines from the bottom of the video button.
"'^BMC-<vt addr range>,<button states range>,<source port>,<source address>,<source state>,<codes>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
codes:
BM - Picture/Bitmap
BR - Border
CB - Border Color
CF - Fill Color
CT - Text Color
EC - Text effect color
EF - Text effect
FT - Font
IC - Icon
JB - Bitmap alignment
JI - Icon alignment
JT - Text alignment
LN - Lines of video removed
OP - Opacity
SO - Button Sound
TX - Text
VI - Video slot ID
WW - Word wrap on/off
SEND_COMMAND Panel,"'^BMC-425,1,1,500,1,BR'"
or
SEND_COMMAND Panel,"'^BMC-425,1,1,500,1,%BR'"
Copies the OFF state border of button with a variable text address of 500 onto the OFF state border of button with a variable
text address of 425.
SEND_COMMAND Panel,"'^BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'"
Copies the OFF state border, font, Text, bitmap, icon, fill color and text color of the button with a variable text address of 315
onto the OFF state border, font, Text, bitmap, icon, fill color and text color of the button with a variable text address of 150.
Programming
93
Advertisement
Table of Contents
