Touch Panel Accessories; Overview; Nxa-Avb/Rgb Breakout Box (Fg2254-11) - AMX Modero NXT-1500VG Operation/Reference Manual

Modero vg-series g4 touch panels
Hide thumbs Also See for Modero NXT-1500VG:
Table of Contents

Advertisement

Touch Panel Accessories

Overview

The following section outlines and describes both the included accessories and other AMX equipment
available for both the Video and Video/RGB models of touch panels.
When working with firmware, it is important to note that version 1.xx of firmware
should only be loaded onto box's using 1.xx series firmware. The version 2.xx
firmware should only be loaded onto box's running 2.xx series firmware.
To confirm the box's current firmware version, you can either navigate to the BOB
Version field on the RGB Adjustment page or launch NetLinx Studio and open the
Online Tree tab.
Modero-VG touch panel firmware 2.60.27 or higher is required to download v2.xx
firmware into the break out box.

NXA-AVB/RGB Breakout Box (FG2254-11)

The NXA-AVB/RGB Ethernet/RGB Breakout Box allows any of AMX's VG-Series Modero Touch
Panels to accept and display both RGB or HDTV Component signals directly from an external source.
Through this single connection point, the 12", 15" and 17" VG-Series Modero panels experience
comprehensive connectivity for audio/video distribution, power, Ethernet connectivity, and RGB. FIG. 2
shows the NXA-AVB/RGB Breakout Box.
Mic Out
(rear)
RGB/Component
FIG. 2
NXA-AVB/RGB Breakout Box (front and rear views)
The NXA-AVB/RGB Breakout Box is available either separately or as part of AMX's exclusive RGB
Kit (NXA-RGBKIT). The RGB Breakout Box (combined with the panel's internal NXA-RGB interface
card) allows the Modero to accept and display high-bandwidth and high-quality RGB and HDTV
Component video signals. The NXA-AVB/RGB stands out amongst all previous AMX Breakout Boxes
in that it is firmware upgradeable, feeds high quality video signals via RJ-45 cables, and provides
keyboard and mouse pass-through functionality via the rear USB connector.
If the PWR/Activity LED (on the front of the unit) is blinking rapidly, this indicates there
is currently an activity in progress (such as a download). DO NOT unplug the unit
during a download as long as the LED is blinking in this manner.
VG-Series Modero Touch Panels
Composite/
Audio
S-Video
In
Luma
Ethernet In
Power
USB
In
S-Video Chroma
RGB (to internal NXA-RGB card)
Audio/Video
Ethernet
Power
(to panel)
(to panel)
(to panel)
Touch Panel Accessories
(front)
19

Advertisement

Table of Contents
loading

Table of Contents