MA SCANCOMMANDER User Manual page 77

Scancommander Scancommander Scancommander Scancommander Scancommander
Assignment of the brightness
master
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
CLEAR
Deletes all settings starting with the selected channel for
this user type.
RETURN
Leads back to the MAKE LAMPTYPE menu.
BRIGHTNESS :
The brightness of different groups can be controlled via the Scancommander´s
brightness master. The channels that are affected by the brightness mas-
ters, are programmed in the BRIGHTNESS and BLACKOUT menu.
EDIT
leads to the menu defining the brightness master
BRIGHTNESS:
CHANNEL :
MODE :
USER 1
ENCODER 2 and 3:
CHANNEL: Here the channel can be selected to be
dimmed by the brightness master (normally dimmer).
MODE: NORMAL resp. INVERS
BLACKOUT :
Corresponding to the BRIGHTNESS menu a channel can
be selected which will be set to 0 if a specific threshold
(e.g. 5%) is reached.
DIMMER NORMAL
DIMMER
4
NORMAL
CHANNEL
Select the line and function
INVERS must be selected if the scan for level=00
is 100 % on.
SHUTTER, < 5%
RETURN
DIMMER
77 77 77 77
77