Freezing Of Single Channels - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
FREEZE button
Changing the selection of
frozen channels
Controlling frozen chan-
nels
Clear FREEZE
Automatic FREEZE on
FOLLOW MODE
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

4.2.4 Freezing of single channels

The FREEZE function fixes the actual value of single channels. These channels
will no longer be affected by any playback.
FREEZE button in the FEATURE block
and simultaneously press
FEATURE button
MEMORY button
Changing the scan selection and pushing another feature button will create a
combination of frozen channels shown in the display.
Selecting a feature where already some scans are fixed will clear the old
selection of scans and will freeze the new selection. This way, for single
features, the Freeze can be cleared by not selecting any scans.
Direct Access via presets or encoder will work even on frozen channels. The
Freeze only protects against playback buttons like memories.
The complete freeze is cleared by pushing
FREEZE button...
and simultaneously ...
CLEAR button in the FEATURE block
All scans fixed to follow effect by EXTRA FOLLOW Mode are frozen
automatically. This is to avoid accidental changes of the beams, which are
used to track a person. (>>Fixing the followspot mode)
SCAN Selection
Select a combination of scans
keep button pressed ...(The display shows a matrix.
The already frozen channels are displayed inverted.)
The LED inside the FREEZE button lights up. For the
actually selected scans the selected feature is fixed.
The fixed channels get no longer affected by any
memory, even if they had been selected in the store
matrix of this memory.
The LED in the FREEZE button is dark.
27 27 27 27
27