Basic Scan Functions; Tuning With The Encoder - MA SCANCOMMANDER User Manual

Controlling functions via
encoder
For any selected function
the DIRECT ACCESS
Menu shows the actual
data in a list at the centre
of the display.
(Right the COLOR dis-
play)
NOTE:
As it is now possible, to select small beams and to control movement scan by scan, the stage initialization
should be done before going on with programming. This is important to have the chance of transforming
programs to new stage setups. (>>Movement initialization)
14 14 14 14
14
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de

3.2 Basic scan functions

3.2.1 Tuning with the encoder

All functions of a registered lamp can be selected and controlled directly. To
see any effect on stage, every lamp has to be part of at least one of the groups
and its brightness master has to be up.
FEATURE button
VIOLET GREEN
YELLOW
RED
WHITE
MORE
1(2)
WHEEL 1
Encoder 1, 2 and 3
Selection of any function is by their button in the
FEATURE block. As soon as the EXTRA LED lites,
the red printed functions are valid.
ORANGE
FEATURE C O L O R
1 WHITE 9 WHITE
10 WHITE
2 WHITE
3 YELLOW 11 RED
4 YELLOW 12 RED
13 WHITE
5 WHITE
6 WHITE 14 WHITE
7 89 -- 15 WHITE
16 WHITE
8 89 --
SCAN SELECTION
The encoder always controls the scans, which are
actually selected in the selection block. Their num-
bers in the display list are printed inverted and the
values are modified when the encoder is used.
The three lower sections in the display show the
functions, which are controlled by the encoder. The
inside part of the encoder controls the function step
by step, the outside ring offers a fast and course
adjustment. (16 steps per increment).
BLUE
PINK
WHEEL 2