The Scancommander Extension Unit - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

7.6 The Scancommander Extension Unit

The SCANCOMMANDER EXTENSION is a 19" unit with
- display with 12 display buttons and one encoder
- 16 scanselection buttons,
- cue card slot
- keyswitch
- all input and output connectors of a Scancommander
MASTER-SLAVE mode
Using the Extension as slave it will be switched to slave mode like a
Scancommander. As noted in 7.4 only the display and the single scan
selection buttons will work.
REMOTE operation (DMX, MIDI, Touchboard)
Programs can be set up at a Scancommander and transferred to the Exten-
sion via the cue card. The remote inputs can be used to recall the playbacks.
As the Extension unit has no brightness master faders, the SETUP function
"MASTERS ALL 100%" has to be switched on as long as the masters are not
remote controlled via DMX. All necessary steps to start the remote operation
can be done at the Extension unit directly.
STAND-ALONE operation (SMPTE Time Code)
For playback of SMPTE Time Code synchronised programs the Extension
can be used as a stand-alone unit.
(SETUP function "MASTERS ALL 100%" has to be switched on).
63 63 63 63
63