Playback Of Presets - MA SCANCOMMANDER User Manual

Playback PRESETS
Preset X-Fades
16 16 16 16
16
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de

3.2.3 Playback of presets

(X-Fader in the Feature block zero)
Feature Button
Display buttons
Display list:
If the actual value of a scan was selected by recalling a preset, the list will no
longer show the channel value, but will show the preset name.
Encoder 1 to 3
Slow x-fades to a preset value:
X-FADER (FEATURE SELECTION BLOCK)
Selects a function for direct access.
In direct access mode preprogrammed PRESETS
can be recalled by their button. Similar to the control
via encoder, only the scans which are actually
selected, will change to the new value.
Modifications via encoder:
- Any modification via the encoder will change the
display to show the actual output value. If the value
returns to the preset value, the display returns to
show the preset name.
The x-fader in the feature selection block sets the
time for the slow fade. On any recall of a preset, while
this fader is raised to a value above zero, the channels
will slowly change from their actual output value to
the value stored in the preset.
When recalling a preset for a switch function like
gobo, this fader should be down, otherwise the gobo
wheels will slowly change to the selected new gobo.