Table of Contents
Advertisement
Difference between
chaser and sequence
programs
Individual step
parameters
GO MODES
Overwriting during play-
b a c k
Linking steps to
memories or chaser
programs
Programming sequence
steps
40 40
40 40
40
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
6. Sequences
Like a chaser a sequence contains a list of pictures stored as steps. The
additional features of the sequence give the chance to prepare complete light
shows and to recall them by the push of a button.
- Unlike the chaser steps, every step of a sequence may have its individual
parameters. The time, until the next step starts (STEP TIME), the x-fade
time and the trigpoint may be different from step to step.
- The steps may be triggered via GO button, by SOUND INPUT, they may be
recalled by manual x-fade or on automatic mode with an internal timer and
preprogrammed or with an adjusted step time.
- GO MODE, STEP TIME and FADE TIME of the single steps can be set
manually to overwrite the programmed parameters.
- Standard chaser programs and memories can be recalled as one step of the
sequence.
- A sequence menu lists the actual and next steps
Programming and modifying a sequence works similar to the chaser pro-
grams.
6.1 Programming of sequences
Saving new steps works like saving new chaser steps.
6.1.1 New sequence steps
STORE button
Matrix can be set
SEQUENCE button 1 - 16
(Prepare your stage plot like on programming memory)
Selecting one of the 16 sequence buttons.
Advertisement
Table of Contents
