Modifying A Chaser Program; Changing Names And Parameters - MA SCANCOMMANDER User Manual

On Line changing of the
chaser parameters
36 36 36 36
36
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de

5.3 Modifying a chaser program

A stored chaser program contains data for:

5.3.1 Changing names and parameters

EDIT button
Chaser button
MODIFY
1
2
......
3
Encoder 2
STEP FADE or
STEP TRIG
Encoder 3
Any change of the parameters will work directly on the running program.
Keyboard with ENTER or RETURN
- Name, SPEED, STEP FADE time and STEP TRIG
Point
- a STORE MATRIX per step
- a set of single channel values per step
EDIT
CHASE
A 25
CHASE:
STEPS: 2
(94770)
FREE:
0.500 HZ
SPEED
2.000 Sec
Changing the SPEED of the chase on line.
Selection of a parameter.
Changing the selected parameter. In case LINK FADE
is selected, the fade time is set in percentage of the
step time.
Input of a new name.
SINGLE
LINK FADE
STEP FADE
1.00 sec
STEP TRIG
0 %