Changing Step Matrix And Levels - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
Testing the single chaser
steps
Changing the channel
values and the matrix of a
step
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

5.3.3 Changing step matrix and levels

EDIT button
Chaser button
MODIFY
MODIFY
1
2
3
4
5
6
......
( )
EDIT MATRIX
Encoder 1
Feature button
1. x STORE button
2. x STORE button
MAKE
BLOCK
EDIT
CHASE
A 25
CHASE:
STEPS: 6
(94770)
FREE:
3
Edit Matrix has to be displayed inverted, if the STORE
MATRIX will be checked or modified within the next
steps.
Scrolls through the list of steps and recalls the steps
on stage.
Note: Scrolling backwards through a selective chaser
with different STORE MATRIX selections from step to
step, will not produce the same pictures as scrolling
forward. To be sure to see the right scenes switch off
MODIFY, turn to step one and switch on MODIFY.
Now, scrolling through the steps forward, will produce
the right scenes.
Scan Selection
Preset button or Encoder
Changing channel values via direct access.
If EDIT MATRIX was selected, it will show the STORE
MATRIX of this step.
Saves the modified step and returns to the modify
mode.
EDIT
MATRIX
DELETE
STEP
DOUBLE
STEP
39 39 39 39
39