Defining Your Own Scans - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

11. Defining your own Scans

Starting with software version 4.31 the Scancommander now offers the
possibility to define your own lamptypes. These lamptypes can be then used
like any other default lamptype in the LAMPTYPE SETUP.
This new feature enables the adaptation of the software to new scantypes
which are not listed in the factory setup or lamptypes which has changed
their channel order. All characteristics (e.g. name, type, channel order of
DMX control and brightness master functions) can be programmed for up to
16 free definable types.
SETUP
MAKE LAMPTYPE
NAME :
SHORT NAME :
SCANTYPE :
CHANNELS :
BRIGHTNESS :
BLACKOUT :
FIXED CH1 :
FIXED CH2 :
FREEPATCH :
C-M-Y MODE :
USER 1
Encoder 1:
Selects the number of
the free definable scan
between 1 and 16.
Attention: This number
does not correlate with
fixture number 1 to 16
which has to be assigned
later. So the lamptype
"USER 1" can be used
for all 16 lamps in the
LAMPTYPE SETUP.
`MY_SCAN1 1 XYZ 199 ´
`MS1 ´
MIRROR
17
DIMMER NORMAL
---- , < 2%
---- , 0%
---- , 0%
0 %
NORMAL
4
BRIGHTNESS
Encoder 2:
Selects the line
to be edit.
EDIT
Encoder 3:
Selects some parts of
adjustments. If the
adjustments are more
complex, the EDIT
button will lead to fur-
ther menus.
75 75 75 75
75