Extra Groups And Brightness Master; Extra Presets - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
EXTRA 1 and EXTRA 2
groups
EXTRA controlled via the
brightness masters
EXTRA 1 and 2 Presets
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

8.3 EXTRA groups and brightness master

EXTRA 1 and EXTRA 2 have their own groups.
STORE
and simultaneously
During EXTRA 1 or EXTRA 2 in DIRECT ACCESS the group buttons recall the
EXTRA groups instead of the scan groups.
When controlling color changer on EXTRA channels, this groups can be set to
be not under the control of the master faders. On dimmer channels EXTRA can
be set to be mastered by the fader.
SETUP
The display buttons right hand side allow the following settings:
The values on display will be send to stage independent
EXTRA 1
from the master faders (color changer).
100 %
The values on display will be reduced according the
EXTRA 1
setting of the group faders.
100 %

8.4 EXTRA presets

As on any scan feature, for EXTRA 1 and EXTRA 2 presets can be programmed
and used for quick and direct access.
PRESET in the top menu
EXTRA turned on
EXTRA 1 or EXTRA 2
Controlling color changers via EXTRA becomes very easy by using the presets.
As with the color channel of the scans the different colours can be prepared
and labelled in their display blocks.
Even controlling dimmer channels via EXTRA is more handy when certain
values are stored as presets. For every EXTRA there are 4 pages offering 44
presets. As the value of the single channels may be different within a preset,
complete lighting cues can be stored as presets.
Keep button pressed and select one of the EXTRA
GROUP buttons A - H
Stores a group for the EXTRA selection.
The display shows the *ADJ.PRES* EXTRA x Menu
65 65 65 65
65