Modifying A Sequence; Changing Sequence Step Times - MA SCANCOMMANDER User Manual

Scancommander Scancommander Scancommander Scancommander Scancommander
Changing step param-
eters
SINGLE Mode
Selecting a parameter
Changing the value
eMail: info@malighting.de . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander

6.3 Modifying a sequence

All data of a sequence are data of single steps. They can be changed as soon
as these steps are selected. Global changes of speed or fade time, as it is
possible on the chaser programs, can be done by overwriting the stored values
via SET RATE and SET FADE.

6.3.1 Changing sequence step times

EDIT button
Sequence button 1-16
MODIFY
1.0
2.0
2.1
2.2
3.0
......
SINGLE
ENCODER 1
STEP TIME or
STEP FADE or
STEP TRIG
ENCODER 2
EDIT
SEQUENCE
1
SEQUENCE
STEPS: 5
(94770)
FREE:
NAME
4
stops the sequence with the last step.
Selection of a step. The stored parameter of this step
are displayed and can be modified.
Selection of one of the parameters.
Changing the value of the selected parameter.
In case LINK FADE is selected, the fade time is set
in percentage of the step time
SINGLE
STEP TIME
2.00 sec
LINK FADE
STEP FADE
1.00 sec
STEP TRIG
0 %
47 47 47 47
47