Macro User Examples - MA SCANCOMMANDER User Manual

72 72 72 72
72
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de

9.5.2 Macro user examples

Simplify the chase programming:
- STORE
- CHASER x
- STORE
must be stored as a macro.
Playback of a few memories (with delay):
The Scancommander can store up to 50 button instructions.
If a macro recalls
- 20 x Memory A/1,
- 10 x A/2 and then
- A/3 ,
so will be first done A/1, after 0.4 second delay A/2 and after
0.2 second A/3 . Longer delays can be realized by programming
chases or sequences.
Exchange of all memories:
A macro is stored :
- BACKUP
- MEMORY
- LOAD
- Encoder on file list start
- Encoder on file
- OK
- QUIT
a second macro loads an other memory file.
With these two macros a complete set of new memories can be loaded
very fast.
Start of a follow action with the actual scan selection:
With the macro
- Pan/Tilt
- Preset "Vocal "
- EXTRA
- FOLLOW
- FREEZE FOLLOW
the actual scan selection can be set to position "Vocal" and at the same time
fixed on the trackerball.